|WL-5470AP | WL-5470AP-EU/BR|
|EN - 57 (PDF)|
|Ethernet LAN data rates||10, 100 Mbit/s|
|Modulation||16-QAM, 64-QAM, BPSK, DBPSK, DQPSK, QAM, QPSK|
|Channels quantity||13 channels|
|Receiver sensitivity||1Mbps @ -96 dBm\n2Mbps @ -94 dBm\n5Mbps @ -93 dBm\n11Mbps @ -89 dBm\n6Mbps @ -89 dBm\n9Mbps @ -89 dBm\n12Mbps @ -87 dBm\n18Mbps @ -86 dBm\n24Mbps @ -83 dBm\n36Mbps @ -80 dBm\n48Mbps- @ 75 dBm\n54Mbps @ -72 dBm|
|Maximum data transfer rate||100 Mbit/s|
|Frequency band||2.412 - 2.472 GHz|
|Networking features||Fast Ethernet|
|Supported data transfer rates||1/2/5.5/6/9/11/12/18/24/36/48/54 Mb/s|
|Compliance industry standards||IEEE 802.11b/g, IEEE 802.3, IEEE 802.3u|
|Supported network protocols||PPTP, L2TP, PPPoE, Telnet|
|Antenna connector type||RP-SMA|
|Antenna gain level (max)||2 dBi|
Ports & interfaces
|Ethernet LAN (RJ-45) ports||5|
|WAN connection||Ethernet (RJ-45)|
|Security algorithms||128-bit WEP, 64-bit WEP, 802.1x RADIUS, WPA, WPA2|
|MAC address filtering||✓|
|Flash memory||2 MB|
|Internal memory||16 MB|
|LED indicators||LAN, Power, WLAN, Y|
|AC input voltage||12 V|
|Output power description||12V DC|
|Operating temperature (T-T)||0 - 60 °C|
|Storage temperature (T-T)||-20 - 65 °C|
|Operating relative humidity (H-H)||20 - 80 %|
Weight & dimensions
|Dimensions (WxDxH)||160 x 115 x 30 mm|
802.11g Hi Power Multifunction AP/Router- 802.11g Hi Power Multifunction AP/Router;
- AP, Client, Bridge, WDS, Universal Repeater, WISP, Gateway 8-Modes;
- Detachable Antenna with R-SMA connector;
- Bandwidth Control and Antenna Alignment Signal Survey;
- Wireless Client Isolation, Watchdog, ACK Timeout, TX power adjustable, Telnet;
- Up to 27dBm Output Power(South America) and -96dBm RSSI.
5-port Hi-Power APThe WL-5470AP is a multi-function AP designed for various different wireless applications. On the hardware side, it features 5 LAN ports and hardware hi-power amplifier that can boost the output power from standard 18dBm to over 25dBm*. On the software front, the WL-5470AP includes both powerful features and an easy-to-use interface to satisfy the demand of WISP operators, Home, or Office users.
WDS Site Survey and Universal Site SurveyThe WL-5470AP adds WDS and Universal Site Survey to make bridge and repeater configuration much easier. Now you no longer have to look around for remote AP’s MAC address to establish a bridge connection.
Boot loader ProtectionThe WL-5470AP feature the boot loader protection. Even if the machine’s firmware crashed during firmware upgrade, the users can still recover the AP. This makes WL-5470AP much more reliable than other Realtek 8186 based AP.
Wireless Client IsolationThe WL-5470AP features the new Wireless Client Isolation function previous available only in more expensive APs. When you enable this function, the wireless clients will not be able to see each other. Therefore, it is an important function for office and Hotspot operator to protect the security between different wireless users.
ACK Timeout and TX Power RegulationThe WL-5470AP features ACK timeout function to let you adjust the timeout value for long distance operation. In addition, 5-level TX power adjustment let you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.
Extended Security FeaturesThe WL-5470AP support WEP, WPA and WPA2 security functions. In addition, WPA enterprise for 802.1x authenticator are featured for AP and WDS mode. The combination of Encryption, Hide SSID and Access Control ensures your wireless network is completely secured from intruder.
The WL-5470AP’s firmware features list are much longer than what has been described. Better yet, OvisLink Corp. are known to continuous upgrade the firmware for new features. Whether it's for WISP, Hotspot, or Home uses, the WL-5470AP is perfect for everyone.