Follow all manufacturer safety guidelines for operating your device.
Failure to practice safe usage of GPS device while driving may result
in damage, injury, or death.
Amzer is not responsible for any damages caused to your car, your
device, or yourselfdue to theinstallationoruseofthispedestalmount.
Windshield Mount with
Swivel Ball Head Assembly
(1) Round Disc
(2) Suction Cup Mount
(3) Smartphone Holder
Swivel Ball Head Assembly Attachment
Attach Cradle or Device to Pedestal
To attach your cradle or device to the dual T-head, insert the
dual T-tabs (G) into the dual T-slots (H) on the back of the
cradle or device.
Do not place mount in or near an air bag deployment zone
or where it will obstruct view of the road.
Find a safe location on the interior of the vehicle’s wind-
shield to mount the pedestal. Firmly push the suction base
ip the base lever down (B)
to the locked position. See diagram below.
Adjust the angle of the pedestal arm by tightening the
angle adjustment knob (C) at the base to the desired angle.
Slip the tightening ring (D)over the pedestal ball. Snap
the dual-T head adapter plate (E) on to the pedestal ball
(F). Screw the tightening ring over the adapter plate until
securely holding the plate. Adjust the angle as needed.
View the manual for the Amzer AMZ83815 here, for free. This user manual comes under the category not categorized and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Amzer AMZ83815? Ask your question here
Got a question?
Do you have a question about the Amzer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Amzer owners to provide you with a good answer.
Number of questions: 0