Brocade ML-1499-72PJ-01R manual
6.8 · 1
View the manual for the Brocade ML-1499-72PJ-01R here, for free. This user manual comes under the category coaxial cables and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Brocade ML-1499-72PJ-01R? Ask your question here
- Contents
- About This Document
- Chapter 1 Antenna Selection and Description
- Chapter 2 Product Compatibility
- Chapter 3 2.4 GHz Single Band Antenna Suite
- Chapter 4 5.2 Ghz Single Band Antenna Suite
- Chapter 5 2.4GHz - 5.2GHz Dual Band Antenna Suite
- Chapter 6 Antenna Cables
- Chapter 7 Supported Antenna Adapters
- Chapter 8 Supported Lightning Arrestors
- Chapter 9 Mounting Kits
- Chapter 10 AP 7131 Transmit Power
- Chapter 11 AP650 Regulatory Domains
- Chapter 1 Antenna Selection and Description
- About This Document
- In this chapter
- How this document is organized
- Document conventions
- Text formatting
- Notes, cautions, and warnings
- A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware, firmware, software, or data.
- A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety labels are also attached directly to products to warn of these conditions or situations.
- Text formatting
- Web support sites
- In this chapter
- Antenna Selection and Description
- Antenna selection
- Antenna selection criteria
- Antenna accessories for Brocade enterprise WLANs
- FCC/USA compatibility
- Antenna suite summary
- Supported 802.11b/g/n antenna suite
- ML-2499-5PNL-72-N Outdoor 135° Panel Antenna: male connector
- ML-2499-7PNA2-01R Indoor 60° Diversity Panel: RP-BNC male
- ML-2499-11PNA2-01R Outdoor 97°Sector Panel: RP-BNC male
- ML-2499-APA2-01R Indoor Rubber Flex, Elbow Joint Dipole: RP-BNC male
- ML-2499-BPDA1-01R Outdoor 10°High-Gain Dish: 20.5 N female
- ML-2499-BPNA3-01R Outdoor 35° High-Gain Directional Panel: type N - female
- ML-2499-BYGA2-01R Outdoor 35° High-Gain Directional Yagi: N female
- ML-2499-HPA3-01R High Performance Omni-Directional “Pipe” Antenna: RP-BNC male
- ML-2499-PNAHD-01R Indoor 55°Directional Panel: RP-BNC male
- ML-2499-SD3-01R Low Profile Ceiling/Surface Mount Omni-Directional Patch: RP-BNC male
- ML-2499-FHPA5-01R Omni-Directional “Pipe” Antenna: N male connector
- ML-2499-FHPA9-01R High Performance Fixed Point Dipole: male connector
- 5.2 Ghz Single Band Antenna Suite
- ML-2499-5PNL-72-N Outdoor 135° Panel Antenna: male connector
- Supported 802.11a/n antenna suite
- ML-5299-APA1-01R Indoor Rubber Flex Jointed Dipole: RP-SMA male connector
- ML-5299-HPA1-01R High Performance Omni-Directional Dipole Antenna: RP-SMA male connector
- ML-5299-PTA1-01R Low Profile Ceiling-Tile Mount Patch: RP-SMA male connector
- ML-5299-WPNA1-01R Wall Mount Panel Antenna w/Articulating Mount: RP-SMA male
- ML-5299-FHPA10-01R Omni-Directional “Pipe” Antenna: N male connector
- ML-5299-FHPA6-01R Omni-Directional “Pipe” Antenna: N male connector
- 2.4GHz - 5.2GHz Dual Band Antenna Suite
- ML-5299-APA1-01R Indoor Rubber Flex Jointed Dipole: RP-SMA male connector
- Supported 802.11a/b/g/n Dual Band Antennas
- ML-2452-APA2-01 Indoor Dual Band Elbow Jointed Dipole: RP-SMA male
- ML-2452-PNA5-01R Dual Band Panel: Connector Type N male
- ML-2452-PNA7-01R Dual Band Panel: Connector Type N-Male
- ML-2452-PTA2M3X3-1 AP-7131 MIMO Facade: 1 IN, RPSMA
- ML-2452-PTA3M3-036 Ceiling Mount, Dual Band, MIMO Patch: RPSMA
- Antenna Cables
- ML-2452-APA2-01 Indoor Dual Band Elbow Jointed Dipole: RP-SMA male
- Supported Antenna Cables
- ML-1499-100JK-01R 100 ft. Low-Loss Coaxial Cable Jumper: N Male to N Male with 2 Connector Seal Kits
- ML-1499-10JK-01R 10 ft. Low-Loss Coaxial Cable Jumper: N Male to N Male
- ML-1499-25JK-01R 25 ft. Low-Loss Coaxial Cable Jumper: N Male to N Male with 2 Connector Seal Kits
- ML-1499-50JK-01R 50 ft. Low-Loss Coaxial Cable Jumper: N Male to N Male with 2 Connector Seal Kits
- ML-1499-72PJ-01R 6 ft. RP BNC Female to RP BNC Male Plenum Coaxial Jumper
- Supported Antenna Adapters
- ML-1499-100JK-01R 100 ft. Low-Loss Coaxial Cable Jumper: N Male to N Male with 2 Connector Seal Kits
- Supported Adapters
- ML-1499-RBNCA1-01R 1 ft. N Female to RP BNC Female Cable Adapter with Connector Seal Kit
- ML-1499-RBNCA2-01R 1 ft. N Male to RP BNC Female Cable Adapter with Connector Seal Kit
- 25-85391-01R 3.5 in. Jumper Cable, RP-SMA (Male) to Type N (Male) Adaptor
- 25-85392-01R 3.5 in. Jumper Cable, RP-SMA (Male) to Type N (Female) Adaptor
- Supported Lightning Arrestors
- ML-1499-RBNCA1-01R 1 ft. N Female to RP BNC Female Cable Adapter with Connector Seal Kit
- Lightning Arrestors
- The grounding lug on a lightning arrestor must be grounded in compliance with local electrical codes.
- ML-1499-LAK1-01R 1 ft. N Male to RP BNC Male Lightning Arrestor with Connector Seal Kit
- ML-1499-LAK2-01R Lightning Arrestor Kit with N Male to N Male Barrel Adapter
- ML-2452-LAK1-01R Lightning Arrestor (N Female to N Female) with N Male to RP-SMA Male Adapter
- Mounting Kits
- The grounding lug on a lightning arrestor must be grounded in compliance with local electrical codes.
- Mounting Kit Support
- Configuring the AP 7131 Series Transmit Power
- 1. Complete the physical installation of the AP 7131 series access point following one of the supported mounting options within either the AP 7131 Series Installation Guide or Product Reference Guide. Both guides are available at http://support.symbo...
- 2. Start a browser and enter the access point’s default static IP address for the WAN port (10.1.1.1).
- 3. Initially log in using admin as the default Username and motorola as the default Password. Use your new password if it has been updated from default.
- 4. Select System Configuration > Quick Setup from the menu tree.
- 5. Select the System Configuration tab to define the access point’s country code and radio configuration.
- 6. Select the Country for the access point’s country of operation.
- 7. Refer to the Radio Configuration field to define how WLAN and WIPS are supported by the access point’s radio(s). Remember, the options available depend on the single, dual or three radio model deployed. Apply your settings when finished with the...
- 2. Start a browser and enter the access point’s default static IP address for the WAN port (10.1.1.1).
- Table 1 Radio Configuration
- Table 2 Maximum Possible Transmit Power
- 10. Select Network Configuration > Wireless > Radio Configuration > Radio1 or Radio 2 from the access point menu tree.
- 11. Refer to the Channel, power and Rate Settings field.
- 12. Set an 802.11 a/n or 802.11 b/g/n radio mode as appropriate.
- 13. For this example, leave the Channel Width at 20/40 and set the Channel to User selected for both the 802.11 b/g/n and 802.11 a/n radios.
- 14. Set the Power Level in respect to the antennas deployed and the defined channel.
- 15. Select Status and Statistics > Radio Stats > Radio1(802.11b/g/n) Statistics or Radio2 (802.11a/n) Statistics from the access point menu tree.
- 10. Select Network Configuration > Wireless > Radio Configuration > Radio1 or Radio 2 from the access point menu tree.
- Supported Antennas by Band, Model, Rate and Transmit Power
- US Regulatory Domain 2.4 GHz Band
- US Regulatory Domain 5.2 GHz Band
- Japanese TELEC Regulatory Domain 2.4 GHz Band
- Japan TELEC Regulatory Domain 5.2 GHz Band
- US regulatory domain 2.4 GHz band
- US regulatory domain 5 GHz band
- Japan TELEC regulatory domain 2.4 GHz band
- Japan TELEC regulatory domain 5 GHz band
- EU regulatory domain 2.4 GHz band
- EU regulatory domain 5 GHz band
General
| Brocade | |
| ML-1499-72PJ-01R | ML-1499-72PJ-01R | |
| coaxial cable | |
| English | |
| Manual (PDF) |
Features
| Cable length | 1.83 m |
| Cable type | CMP Plenum, RG-58 |
| Connector 1 | RP BNC |
| Connector 2 | RP BNC |
| Connector 1 gender | Male |
| Connector 2 gender | Female |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Brocade ML-1499-72PJ-01R below.
Is the manual of the Brocade ML-1499-72PJ-01R available in English?
Unfortunately, we do not have the manual for the Brocade ML-1499-72PJ-01R available in English. This manual is available in English.
Is your question not listed? Ask your question here
No results
Got a question?
Do you have a question about the Brocade and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Brocade owners to provide you with a good answer.
Number of questions: 0