CoolMax VL-600B manual

CoolMax VL-600B
8.4 · 1
PDF manual
 · 3 pages
English
manualCoolMax VL-600B

Model: VL-600

1. Function Description
This power supply is designed for personal computer. There are seven DC outputs:
+3.3V, +5V, +12V1, +12V2, +12V3, -12V & +5V
SB
, and it provides power to all
computer systems and peripherals with maximum protection.
Here are some of the key features:
Full Range Input Voltage (OPTIONAL)
Active Power Factor Correction(OPTIONAL)
Surge Current Protection
Input Transient Voltage Protection
Over Voltage Protection
Over Load Protection
Short Circuit Protection
Low noise design ***
Compare with the conventional power supply which hires 80mm fan
assembled at the side of chassis, the power supply is assembled with a 140mm
led fan horizontally located at the top chassis, with bigger fan blade, and just
right assembly location, it cools down the heating components more
effectively, and much low noise also gained.
2. How to Setup
It is rather simple to install this power supply to your precious computer tower.
Follow the steps below to finish the setup.
Step1: Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws
to fix the power supply to tower.
Step2: Put the Main Power Connector, ATX12V Connector, Peripheral
Connectors, Floppy Connectors, PCI-Express Connector and many
others (when available) to the corresponding male sockets such as
main-board, peripheral devices (i.e. HDD, CDROM etc.) and floppy
drivers respectively. When you connect connectors, please pay
attention to the orientation of them because of the different hole sizes. Find
the proper orientation and push down firmly making sure that
the pins are aligned.
3. Specifications
3.1 Input Requirements
The power supply shall operate as below:
1

View the manual for the CoolMax VL-600B here, for free. This user manual comes under the category Computer adapters and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the CoolMax VL-600B? Ask your question here

Got a question?

Do you have a question about the CoolMax and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other CoolMax owners to provide you with a good answer.

Number of questions: 0

General
CoolMax
VL-600B | VL-600B
Computer adapter
895963147493, 0895963147493, 0191120084275, 8959631474938, 0115970734050, 0641676606617
English
Manual (PDF)
Power
Total power600 W
AC input voltage115 - 230 V
Maximum input current (@110V)+12V1, +12V2, +12V3, +3.3V, +5V, +5Vsb, -12V A
Combined power (-12V)6 W
Combined power (+5Vsb)12.5 W
Max output current (+3.3V)24 A
Max output current (+5V)24 A
Max output current (-12V)0.5 A
Max output current (+5Vsb)2.5 A
Power protection featuresOver voltage, Overload, Short circuit
Performance
Power supply unit (PSU) form factorATX
PurposePC
ATX version2.2
Noise level- dB
Design
Product colourBlack
Fan diameter140 mm
Number of fans1 fan(s)
Cooling typeActive
Illumination
Ports & interfaces
Motherboard power connector20+4 pin ATX
Number of SATA power connectors2
Peripheral (Molex) power connectors (4-pin)6
PCI Express power connectors (6-pin)1
CPU P4 connector (4-pin)1
Floppy drive power connector1
Cabling typeNon-Modular
Weight & dimensions
Width160 mm
Depth83.8 mm
Height150 mm
Weight1800 g
Other features
Illumination colourBlue
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-20 - 80 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)5 - 90 %
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the CoolMax VL-600B below.

Is your question not listed? Ask your question here

No results