View the manual for the Elica STRIPE BL/A/90/LX here, for free. This user manual comes under the category exhaust hoods and has been rated by 47 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Elica STRIPE BL/A/90/LX? Ask your question here
The Elica STRIPE BL/A/90/LX is an exhaust hood designed for ducted extraction, with a maximum extraction power of 1200 m³/h. It has a fluid dynamic efficiency class of C, a lighting efficiency class of D, and a grease filtering efficiency class of F. The exhaust hood has three speeds and emits a noise level of 53 dB. When set to low speed, it emits 43 dB of noise, and when set to high speed, it emits 53 dB. The pressure it produces is 277 Pa. The exhaust hood has two Halogen bulbs installed in it and it has a number of bulbs of 2. Constructed with premium materials, Elica STRIPE BL/A/90/LX provides durability and reliability over time. There are no additional features or specifications available for this exhaust hood, but it is designed to efficiently extract smoke, grease, and odors from the kitchen. Measuring up to 90 centimeters in length, the exhaust hood is both sleek and efficient and would likely fit well in a modern kitchen. The Elica STRIPE BL/A/90/LX exhaust hood could very well be a good choice for those looking for a simple and modern exhaust hood that can handle frequent use.
|Type of extraction||Ducted|
|Maximum extraction power||1200 m³/h|
|Fluid dynamic efficiency class||C|
|Lighting efficiency class||D|
|Grease filtering efficiency class||F|
|Number of speeds||3|
|Noise level||53 dB|
|Noise level (low speed)||43 dB|
|Noise level (high speed)||53 dB|
|Number of bulbs||2 bulb(s)|
|Bulb power||20 W|
|Grease filter type||Charcoal|
|Energy efficiency class||C|
|Motor power||- W|
|Annual energy consumption||117 kWh|
|Height (min)||1035 mm|
|Height (max)||1465 mm|
|Height without chimney||512 mm|
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Elica STRIPE BL/A/90/LX below.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Elica STRIPE BL/A/90/LX has a height of - mm.
The Elica STRIPE BL/A/90/LX has a width of 898 mm.
The Elica STRIPE BL/A/90/LX has a depth of 137 mm.
The Elica STRIPE BL/A/90/LX has energy label C.
Yes, the manual of the Elica STRIPE BL/A/90/LX is available in English .
Is your question not listed? Ask your question here