Extron TLP Pro 725T manual

Extron TLP Pro 725T
6.6 · 1
PDF manual
 · 4 pages
manualExtron TLP Pro 725T

TLP Pro 725T Series and

TLP Pro 1025T Series • Setup Guide


The TLP Pro 725T series are 7-inch tabletop capacitive touchscreens with a resolution of 1024x600 and 24-bit color depth. The
TLP Pro 1025T series are 10-inch tabletop capacitive touchscreens with a resolution of 1280x800 and 24-bit color depth.
All these models can be placed on any convenient at surface.
This guide provides instructions for experienced installers to install these touchpanels. For complete instructions, see the
TLPPro 725 and TLP Pro 1025 Series User Guide, at www.extron.com.

Setup Checklist

Get Ready
Download and install the latest version of the following software:
GUI Designer — for designing layouts for Extron TouchLink
Pro touchpanels and third party touch interfaces.
Global Configurator
Professional or Global Configurator Plus — for setting up and conguring the control processor
and touchpanel.
Toolbelt — provides device discovery, device information, rmware updates, and conguration of network settings,
system utilities, and user management for TouchLink Pro devices.
Global Scripter
— provides an integrated development environment for Extron control systems programming.
NOTE: All four software programs are available from www.extron.com.
Obtain the following network information from your network administrator:
DHCP status (on or off). If DHCP is off, you must also obtain:
IP address Subnet mask Gateway
User name — this can be either admin or user.
Password — by default this is extron (for either admin or user).
Make a note of the touchpanel MAC address.
Mount and Cable All Devices
Do not power on the touchpanels or control processors until you have read the ATTENTION in the “Base” section of
the TLP Pro 725 and TLP Pro 1025 Series User Guide or the IPCP Pro User Guide or IPL Pro User Guide.
Ne branchez pas les écrans tactiles ou les contrôleurs avant d’avoir lu la mise en garde dans la section «Base » du
TLP Pro 725 and TLP Pro 1025 Series User Guide ou du IPCP Pro User Guide or IPLProUserGuide.
Mount the units. There are several mounting options for TouchLink Pro touchpanels (see Mounting on the next page).
Connect the touchpanel to a Power over Ethernet injector (not provided). Extron recommends the XTP PI 100 power injector,
which can be purchased separately.
Connect the power injector to the LAN and power it on.
Set up the Touchpanels for Network Communication
Connect the PC that you are using for setup, the control processor, and touchpanel to the same Ethernet subnetwork.
Use the Setup Menu (see page 4) or Toolbelt to set the DHCP status and, if necessary, the IP address, subnet mask,
gateway, and related settings for the touchpanel.
Configure the Touchpanels
The GUI Designer Help File, the Global Configurator Help File, and the Toolbelt Help File provide step-by-step instructions
and more detailed information. The Global Configurator Help File includes an introduction to the software and sections on
how to start a project and conguration. Global Scripter provides an Extron-exclusive Python library (ControlScript
) and
Global Scripter modules to get you started.

Product Category

Go to for the
complete user guide and installation
instructions befor
e connecting the
oduct to the power sou

View the manual for the Extron TLP Pro 725T here, for free. This user manual comes under the category monitors and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Extron TLP Pro 725T? Ask your question here

Got a question?

Do you have a question about the Extron and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Extron owners to provide you with a good answer.

Number of questions: 0

Intuitive touchscreen technology lets you control your PC right from the screen. And the vibrant 1980 x 1200 resolution ...
No need to buy external speakers for great audio.  With integrated speakers this display is ready to go once you’re conn...
TLP Pro 725T | 60-1562-02
Manual (PDF)
Display resolution1024 x 600 pixels
Contrast ratio (typical)700:1
Viewing angle, horizontal75 °
Viewing angle, vertical75 °
Screen shapeFlat
Display diagonal7 "
Display brightness420 cd/m²
Touchscreen technologyCapacitive
Display technologyLCD/TFT
Product colourBlack
Thin Client
Internal memory2048 MB
Built-in speaker(s)Yes
Number of speakers1
Built-in cameraNo
Built-in microphoneNo
Other features
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Weight & dimensions
Width (without stand)180.9 mm
Depth (without stand)89.8 mm
Height (without stand)121.5 mm
Weight (without stand)790 g
Logistics data
Harmonized System (HS) code85285210
AMD FreeSyncNo
Wall mountableNo
Ports & interfaces
USB Type-A downstream ports quantity1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron TLP Pro 725T below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What is the screen size of the Extron TLP Pro 725T?

The screen size of the Extron TLP Pro 725T is 7 ".

What is the screen resolution of the display of the Extron TLP Pro 725T?

The screen resolution of the Extron TLP Pro 725T is 1024 x 600 pixels.

Is the manual of the Extron TLP Pro 725T available in English?

Yes, the manual of the Extron TLP Pro 725T is available in English .

Is your question not listed? Ask your question here

No results