View the manual for the Festool ISC 240 Li here, for free. This user manual comes under the category saws and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Festool ISC 240 Li? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Festool ISC 240 Li below.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Yes, the manual of the Festool ISC 240 Li is available in English .
Is your question not listed? Ask your question here