-Avoid installing your telephone set where there is high temperature, excessive humidity and risk of
- You telephone set base may damage smooth and varnished surfaces. We suggest installing your
telephone set on anti-slipping surfaces.
- Avoid using your telephone set after its lifetime validity expires. Follow the environment protection
regulations to discard it.
- If your telephone set is desk mounted, make sure to place the handset in the correct position when
you hangup your phone.
the last number you
called. ( Maximum
number of digits is 32).
Mode: This key alters the dialing mode from decadic to
multifrequency. when pressed, you telephones communicates
mutlifequency signals (tone) until you hang up the phone.
Exp: you wish to consult your credit card bill. Call the credit card
administrator, as soon as the call is completed, press the TONE key
for your telephone to communicate in multifrequency mode, submitting
your information in a faster and more secure way.
Pause: Pressing this key,
will introduce a dialing pause
that may be used when you are
either connected to a PABX or
using another service
offered by your carrier.
Exp: you are connected to
a PABX, and wish to call
the number 0 XX 48 281
- type the external access
-press PAUSE + 0 XX 48
If you hear a busy tone,
hang up the telephone;
next, press REDIAL and
wait, your telephone set
will automatically redial.
Mute: By pressing and
holding down this key,
you interrupt the voice
transmission to your
correspondent, who will
not be able to hear you. To
restore the voice
release the key.
Flash: Pressing this key causes a little break in multifrequency
lines, and may be used in two situations:
-For programming and using the services offered by your carrier.
-For accessing some features of your PABX.
Your flash time is set at 300 ms.
and#:These keys are used
when the signaling mode of your
telephone line is multifrequency
type. You can programming
services offered either by the
carrier or by your PABX.
If your telephone
set is wall mounted and a call is
placed on hold, this feature
will allow the handset to rest in
vertical position without
disconnecting the call.
Fitting for the telephone
line's wiring (smooth cable).
Fitting for the
of the electronic
bell with the
Fixing: Follow the drilling points to fasten your telephone onto the wall. Use a 6-mm drill as well
as compatible screws and nuts. Once the screw is fasten, just hang your telephone onto the screw
and push it downwards .
Selection keys with the P (pulse) and T
(tone) indications. To define the signaling mode of your
telephone line, make a call with the key at the T (tone)
position. If the call has been successfully completed,
it means your line uses DTMF (tone) signal.
You will benefit from a faster
dialing, besides a series of
other services that your
carrier may offer. If the call
fails to complete, this
indicates that your line has
a decadic signaling mode.
Select the position P
(consult your carrier about
the possibility to switch
your line's signaling mode
over Tone mode..
-Keys for functions: Flash, Redial, Pause, Mode, Mute, * and #.
-Decadic & Multifrequency Keypad.
-Compatible with Telecommunications Network, CSP-type central (Control Stored Program), and
-Dimensions in mm: length: 223.6 mm, maximum width: 148 mm, maximum height: 71 mm.
For telephone models with lock key :
The key is located under the telephone base, and used to lock the keypad, and the user from making calls.
Incoming calls can still be received while the lock key is activated.
Dear consumer, thank you for buying one ofINTELBRAS products. Gôndola is a telephonedesigned using the highest technology tomeet your requirements and to improve thequality of your communications.
Under the below mentioned terms and conditions INTELBRAS will cover the cost of
replacement parts for one year as well as the labor required to install / service those
parts. Simply bring your telephone set into your local INTELBRAS authorized
dealer center and he will cover the charges. (Warranty period valid from date of
At the time of purchase from our authorized INTELBRAS dealer, your telephone set
comes with a full 1 (one) year warranty of wich 3 months represent a legal warranty
and 9 months as contractual warranty. This warranty covers all problems which are
due to manufacturer´s defect and will not apply in case of inappropriate use of the
product by the customer or as a result of the following :
Damages caused by lightning, flood, voltage fluctuation and inappropriate
installation not in accordance with the product manual instructions.
Any alterations in the product serial number.
Under the above conditions of this warranty close, INTELBRAS reserves the right
to make any modification to its product without prior notice
For more information please contact our customer support service at : 0800-7042767
E-mail : email@example.com
Code:1124079Manual 's version: 0.1/05
BR 101 - Km 210 - Área Industrial - CEP 88104-800
São José - Grande Florianópolis/SC
Tel : +55 48 32819755 - Fax +55 48 3281 9505
View the manual for the Intelbras TC 500 here, for free. This user manual comes under the category telefoons and has been rated by 3 people with an average of a 6. This manual is available in the following languages: Engels. Do you have a question about the Intelbras TC 500? Ask your question here
Got a question?
Do you have a question about the Intelbras and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Intelbras owners to provide you with a good answer.
Number of questions: 0