Locating at fixingscrew of soft-cover in the tail cap
Underoffstatus,pressthebuttonswitch and hold 1 second or above, the light turns on
at moment that the button switch is pressed and turns off when the button switch is
released.
Press then release the button switch within 1 second. Everyrestart, output brightness
keeps same as previous memorized brightness.
While on, pressandholdthebuttonswitch, outputwill change by the order “Low-
Medium-High", releasing the button switch will froze the output at presented
brightness.
Quickly press the button switch twice (ifinitialstatusisoff, triply press)。Understrobe
status, pressingthen releasing the button switch whin 1 second will turn off the output, if
the hold time over 1 second, thelightrestores to memorized brightness
Whileon, hold the button switch until the light becomes off. Usually the output will
experience three loops of“Low-Medium-High”before entering into off; Under lock
status, the hidden lamp under the button switch will turn on 1 second while the button
switch is unexpectedly pressed, but the light will not turn on.
Triply click the button switch within 1 second or reinstall after taking out the battery.
ConnectthechargertoAC power source or wall socket, then discover the soft-cover
and insert DC plug of charger into the charge port. The indication ofthecharger displays
the charge status. See below:
Red -- charging in progress； Green -- completed or not connected 。
When charge completed, please take off the charger from AC power source or wall
socket, and pull out the DC plug , insert the soft-cover into his seat.
Don’t always connect the charge with AC power source after charge
completed, it may cause to fire.Don’t longtimeconnectDCplugtogether
withtheflashlightwhileno charge.
2
4
5
6
3
1
8
9
7
8
Specification
1 LED
2 Lens
3 Stainless Steel Bezel
4 Button Switch
5 Body
6 Tail Cap
7 Fixing Screw of Soft-cover
/ Key-ring Hole
8 Charge Port
9 Soft-cover
Parts of the Flashlight
Momentary On:
Turn ON/OFF:
ChangeMode:
Strobe:
Lock Button Switch:
Unlock:
Charge:
Warning
ReplacingBattery:
Pleaseusingthefactory supplied battery. Firstly, counterclockwise unscrew and take
out the tail cap, then take out the battery and insert the fresh battery, the positive of
battery should towards the head of the flashlight. Refer to below figure
正极
充电输入正
负极( 充电输入负)
Wheninternal MCU detects the inner temperature over 85℃，within next
10 minutes, it will make regular and controls the output smoothly drop
to 60% of maximum brightness, then staying at this brightness level
When battery voltage drops to , the lampunder the button
switch will flash twice per 3 seconds interval, and theoutputwill
automaticallyjump to lower brightness level. If the flashlight is running at
low brightness level, MCU will shut off the power supply.
3.15±0.05V
Positive
Negative( Charge Input-)
ChargeInput+
Manual
View the manual for the Olight S80 Baton here, for free. This user manual comes under the category Torches and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Olight S80 Baton? Ask your question here
Do you have a question about the Olight S80 Baton and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Olight S80 Baton owners to provide you with a good answer.
Number of questions: 0
+4
Olight S80 Baton specifications
Below you will find the product specifications and the manual specifications of the Olight S80 Baton.
Got a question?
Do you have a question about the Olight S80 Baton and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Olight S80 Baton owners to provide you with a good answer.
Number of questions: 0