PowerPlus POW8136 manual
View the manual for the PowerPlus POW8136 here, for free. This user manual comes under the category saws and has been rated by 2 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the PowerPlus POW8136? Ask your question here
- 1 APPLIANCE
- 2 DESCRIPTION
- 3 PACKAGE CONTENT LIST
- 4 SYMBOLS
- 5 CORRECT USE OF YOUR POW8136
- 6 GENERAL POWER TOOL SAFETY WARNINGS
- 6.1 Work area
- 6.2 Electrical safety
- 6.3 Personal safety
- 6.4 Power tool use and care
- 6.5 Service
- 7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
- 8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES
- 9 ASSEMBLY
- 9.1 Before putting the machine into operation
- 9.2 Setting up the saw unit (Fig. 1/2)
- 10 OPERATION
- 10.1 Making 90° crosscuts with turntable at 0° (Fig. 1/3)
- 10.2 Precision adjustment of the stop for crosscut 90° (Fig. 4/5)
- 10.3 Making 90° crosscuts with turntable at 0° - 45° (Fig. 6)
- 10.4 Mitre cuts 0°-45° and rotary table 0° (Fig. 4/7)
- 10.5 Precision adjustment of the stop for 45° mitre cuts (Fig. 2/4/8)
- 10.6 Mitre cuts 0-45 and rotary table 0°-45° (Fig. 4/9)
- 10.7 Locking lever (13)
- 11 CHIP EXTRACTION (FIG. 1)
- 12 REPLACING THE SAW BLADE (FIG. 11)
- 13 LASER FUNCTION (FIG. 12)
- 14 CLEANING AND MAINTENANCE
- 14.1 Maintenance
- 15 SERVICE DEPARTMENT
- 16 TECHNICAL DATA
- 17 NOISE
- 18 WARRANTY
- 19 ENVIRONMENT
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POW8136 below.
What is the best way to clean my saw blade?
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
My saw blade is blunt. What now?
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
How do I remove rust from my PowerPlus saw?
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
What does '16V' or '20V' mean?
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
Do I have to wear hearing protection when using a saw?
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Is the manual of the PowerPlus POW8136 available in English?
Yes, the manual of the PowerPlus POW8136 is available in English .
Is your question not listed? Ask your question here
No results
Got a question?
Do you have a question about the PowerPlus and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other PowerPlus owners to provide you with a good answer.
Number of questions: 0